Lube Oil Refinery Plant and Used Oil Treatment System

Product Description:

• YJ-DSL diesel oil refinery machine can refining gasoline motor oil, diesel motor oil, all kinds of engine oil, mineral oil, synthetic oil, and other waste lubricant oil, transmission oil, hydraulic oil, gear oil and other used black lubricant oil to clean diesel oil. YJ-DSL is able to recover good quality diesel oils with a high regenerate rate more than 93%-95% and low cost, it has practically negligible pollutants for the environment.
• There are two ways to manage the spent lube oil, the first is to recycle it into lube base oil, and another method is to crack it in to fuel. The same technology however that distills motor oil from crude oil is essentially the same technology that distills used oil into diesel fuel. The process to re-refine used motor oil is easier than refining crude oil.
• By our 85-93% recovery, heavy fuel oil distillation for diesel oil by pyrolysis distillation could be obtained through different distillation temperature ranges. 50-160℃ is the gasoline fraction range, and 160-410℃ is the diesel fraction range. After cracking and cooling, about 2-5% of the liquid is gasoline. Approx 85-90% liquid is similar to diesel and able to meet the specification of -15# diesel. They’re able to be used as industrial or civil-use fuel, even power-driven fuel. Motor oil is from a fraction after diesel in the oil refining industry, they belong to the same petroleum family having different molecular weight, it is very feasible to produce diesel.

 

Working process of lube oil refinery plant:

The working process for the YJ-DSL Lube Oil Refinery Plant is to pump the waste oil into the distillation kettle, the heating system will start the stirring device. Gasoline components and water in the used oil can be distilled out when the temperature reaches to 50 ℃-100℃. When the temperature reaches 160 ℃-260℃, after efficient catalytic and cracking, the light and heavy components will convert to diesel from vapor. Finally, we filter all collected diesel oil liquid, then we can get high quality finished diesel oil.

 

Flow Chart:

 

 

Features of Lube Oil Refinery Plant:

1. Low cost, recycle one ton used oil need only about 5-6USD.
2. The YJ-DSL series machine is easy to operate, low running cost, it needs only 1-2 workers to operate.
3. YJ-DSL series can recycle all kinds of used oil. Such as black diesel, used engine oil, used machine oil, used rubber oil, almost all industrial oil and waste plastics oil to diesel fuel. The cracked oil is able to be used as industrial or civil-use fuel, even power-driven fuel.
4. The entire process is absolutely environmental protection without any smoke and smell.
5. High-efficiency gas heating system, adopt hot air heating technology, can be heated by fuel oil, natural gas, etc, not only safety but also efficiency is increased in the production processing. Waste gas from the machine will be burned in the distillation chamber, to produce a lot of energy and to save the resources.
6. High recovery rate: the highest recovery rate can reach 93-95%. Gasoline 2-5%, diesel fuel 85-90%.

 

Recycled oil report from DS Lube Oil Refinery Plant:

Item	Test standard	result	Standard value
Density(15℃)	ASTM D1298	0.84kg/l
kinematic viscosity(40℃)	ASTM D445	3.36cst	1.6-5.8cst
Flash point(closed cup)	ASTM D93	60℃	≥55℃
Pour point	ASTM D97	-19 ℃	≤ 0℃
Distillation temperature
10% point	ASTM D86	204      ℃
50%point		289      ℃	≤300℃
90% point		344      ℃	≤355℃
95% point		359      ℃	≤365℃
Cetane index	ASTM D976	54.42	≥45
Water content	ASTM D95	Trace     %vol	≤Trace%vol
Sulfur content	ASTM D1226	0.151      %wt	≤0.2%wt

 

YANGJIANG Machine Manufacture Co., Ltd has unique technology and rich experience in the waste oil recycling industry, the company constantly seeks development, extensively absorbs the world's advanced oil purification technology, and is committed to research and development in the field of oil treatment.

Welcome to contact us for more details (+86 133 9980 7550 WhatsApp / WeChat 24-H service).