Used Oil Refinery Plant with CE Standard
- The reduced pressure distillation technology of the used oil refinery plant can fully react to all kinds of waste lube oil and catalyst, and then after distillation and cooling to produce recycled lube oil.
- There are two ways to manage the spent lube oil, the first is to recycle it into lube base oil, and another method is to crack it in to fuel. Cracking is a petroleum refining process in which heavy-molecular weight hydrocarbons are broken up into light hydrocarbon molecules by the application of heat and pressure, with or without the use of catalysts, to derive a variety of fuel products. Cracking is one of the principal ways in which used oil is converted into useful fuels such as motor gasoline, diesel fuel and home heating oil.
- Cracking breaks carbon-carbon bonds to turn heavier hydrocarbons into lighter ones. This can occur thermally (as occurs during the petroleum formation process beneath the earth) or through the action of a catalyst.
Features of Used Oil Refinery Plant:
- Without smoke and bad smell in the whole process, protect the environment.
- Safety, the high temperature is more than 400 degrees, but the temperature will be decreased quickly due to the 3 stages water circulate condenser, be sure all machine is safe.
- Good recycled oil quality can be reused directly.
- The recovery rate is more than 90%.
- The burner heating method will guarantee safe, and enhance heat efficiency.
- The heating system contains electromagnetic infrared heating and a diesel oil burner.
The Harm of containing water, gas and impurities:
- The oil will oxidate rapidly and product acidic material, eroding the metal surface.
- The chemical additive invalidates, reducing the thickness of lubrication film and aggravating the machine abrasion.
- The lubrication, cooling, the flow were reduced then accelerating the fatigue of the metal surface.
- The ice crystals which formed under low temperature will block elements and lower the systemic rigidity.
- The slow response of the system run with irregular movement，lower the conduction performance.
- The high temperature of the oil can’t cool effectively.
- The oil pump and the power equipment were damaged because of the cavitations.
If we deal with this waste engine oil by burning or burying, it does not only bring serious environmental pollution, also caused a huge waste of energy. So on the basis of reusing resources or environmental protection, or view the point of being able to bring enormous economic benefits for the producers, the waste oil for recycling has very good prospects.
This machine by YANGJIANG can treat used engine oil, plastic oil, tyre oil, heavy fuel, oil sludge, lubricant oil, sulfated oil, liquid cooking oil, naphtha and oil from the car repair shop, machinery, ship, water pump, etc. After re-refining, we can get diesel oil, which can be reused directly, the recovery rate is more than 90%.
Based on project management, equipment design, procurement and rich modular manufacturing, testing, commissioning and after-sales service experience in oil processing, Chongqing Yangjiang Machinery is committed to providing customers with complete and efficient modular solutions to meet customer needs. If you have any needs and questions about the oil refinery machine, please feel free to contact us.
